|
|
|
|
| |
These outdoor signs are a perfect to recognize or memoralize an important. They come in a variety of materials |
Go to Page: [Prev] [1] [2] [3] [4] [Next]
|
| |
| |
|
|
|
|
|
|
Reinforced plastic square post is stronger and more stable than round posts with 15% greater wind resistance than round posts. There is 10 times more surface area contact between sign and post with no sign twisting or post rotating in the base.Impact resistant post has reinforcing center crossbars and base has factory installed wheels for easy portability. Lightweight and will never rust, chip, crack, or crumble. Post has Cap and Pre-drilled holes for multiple sign sizes. Hardware included.
Production lead time for this product is 6 days.
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Prod # |
|
Description |
|
1-9 |
|
10-24 |
|
25-49 |
|
|
|
|
|
|
|
|
|
| JPC2460W |
|
1 3/4"(W)x60"(H) (post), 24"x16 1/2" (base) |
|
$717.00 |
|
$681.15 |
|
$645.30 |
|
|
|
|
|
|
|
|
|
| JPC2472W |
|
1 3/4"(W)x72"(H) (post), 24"x16 1/2" (base) |
|
$747.00 |
|
$709.65 |
|
$672.30 |
|
|
|
| |
|
| |
| |
| |
|
|
|
|
|
|
The Wind Sign II Features: Springs connect the frame to the base so signs resist strong winds and return to upright position. "Quick Change" feature means signs can be changed in seconds with no hardware or tools. Base is sand fillable for ballast and has two preinstalled wheels for portability. Use corrugated plastic sign or other rigid material up to 3/16" thick. All plastic-won't rust or splinter-no maintenance.
Production lead time for this product is 6 days.
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Prod # |
|
Description |
|
1-9 |
|
10-24 |
|
25-49 |
|
|
|
|
|
|
|
|
|
| JPC1822 |
|
29 1/2" (W) x 50 1/2" (H) x 24" (D) |
|
$1,061.70 |
|
$1,008.62 |
|
$955.53 |
|
|
|
| |
|
| |
| |
| |
|
|
|
|
|
|
Change signs in seconds with a patented Quick-change feature, signs easily slide in and out. No tape, hook and loop, or screws needed. Molded plastic can be used indoors or out, no rust, discoloring, splinters or maintenance.Holds rigid sign material up to 3/16" thick. Features molded in handle and textured feet that help keep the sign secure on the ground. Up to 6 lbs. of dry sand for ballast recommended. Grabber hinges hold a rider sign and prevent the frame from opening too far.
Production lead time for this product is 6 days.
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Prod # |
|
Description |
|
1-9 |
|
10-24 |
|
25-49 |
|
|
|
|
|
|
|
|
|
| JPC1240BK |
|
26" (W) x 32 3/10" (H) x 2" (D) |
|
$357.00 |
|
$339.15 |
|
$321.30 |
|
|
|
| |
|
| |
| |
| |
|
|
|
|
|
|
The Signicade A-Frame is a durable plastic sign stand that will not rust, splinter or ever need painting. You can display a sign on each side 24" x 36". Attach poster material, self-adhesive vinyl, or other sign material directly to the surface. Indented area helps protect the sign face. Up to 10 pounds of dry sand recommended for ballast. Molded handles for easy portability.
Production lead time for this product is 6 days.
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Prod # |
|
Description |
|
1-9 |
|
10-24 |
|
25-49 |
|
|
|
|
|
|
|
|
|
| JPC130-BK-1PKF |
|
25" (W) x 45" (H) x 3" (D) |
|
$495.00 |
|
$470.25 |
|
$445.50 |
|
|
|
| |
|
| |
| |
| |
|
|
|
|
|
|
The Signicade Deluxe A-Frame is a durable plastic sign stand that will not rust, splinter or ever need painting. You can display a sign on each side 24" x 36" x 3/16". The molded handle provides easy portability, and the "lift up, drop in" feature requires no hardware or tools. The stand has 4 fill holes for adding dry sand for ballast to keep the sign from blowing over-up to 10 lb total recommended. Use rigid sign materials up to 3/16" thick .
Production lead time for this product is 6 days.
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Prod # |
|
Description |
|
1-9 |
|
10-24 |
|
25-49 |
|
|
|
|
|
|
|
|
|
| JPC140-W-1PKF |
|
27" (W) x 45" (H) |
|
$597.00 |
|
$567.15 |
|
$537.30 |
|
|
|
| |
|
| |
| |
| |
|
|
|
|
|
|
Change signs in seconds with a patented Quick-change feature, signs easily slide in and out. No tape, hook and loop, or screws needed. Molded plastic can be used indoors or out, no rust, discoloring, splinters or maintenance.Holds rigid sign material up to 3/16" thick. Features molded in handle and textured feet that help keep the sign secure on the ground. UP to 6 lbs. of dry sand for ballast recommended. Grabber hinges hold a rider sign and prevent the frame from opening too far.
Production lead time for this product is 6 days.
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Prod # |
|
Description |
|
1-9 |
|
10-24 |
|
25-49 |
|
|
|
|
|
|
|
|
|
| JPC1240W |
|
26" (W) x 32 3/10" (H) x 2" (D) |
|
$357.00 |
|
$339.15 |
|
$321.30 |
|
|
|
| |
|
| |
| |
| |
|
|
|
|
|
|
Rock-It Base holds a square post with reinforcing crossbars for 15% greater wind resistance and strength than round posts, with no sign twisting or rotating in the base. The base will not crack, chip, or crumble and has a fill hole to add dry sand for ballast so it won't tip in the wind, and durable plastic wheels. The post is pre-drilled for multiple sign sizes. Plastic is lightweight and will never rust or splinter.
Production lead time for this product is 6 days.
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Prod # |
|
Description |
|
1-9 |
|
10-24 |
|
25-49 |
|
|
|
|
|
|
|
|
|
| JPCRB2460BK |
|
24" (W) x 25 1/5" (L) x 60"(H) |
|
$717.00 |
|
$681.15 |
|
$645.30 |
|
|
|
|
|
|
|
|
|
| JPCRB2472BK |
|
24" (W) x 25.5" (L) x 72"(H) |
|
$747.00 |
|
$709.65 |
|
$672.30 |
|
|
|
| |
|
| |
| |
| |
|
|
|
|
|
|
Reinforced plastic square post is stronger and more stable than round posts with 15% greater wind resistance than round posts. There is 10 times more surface area contact between sign and post with no sign twisting or post rotating in the base. Impact resistant post has reinforcing center crossbars and base has factory installed wheels for easy portability. Lightweight and will never rust, chip, crack, or crumble. Post has Cap and Pre-drilled holes for multiple sign sizes. Hardware included.
Production lead time for this product is 6 days.
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Prod # |
|
Description |
|
1-9 |
|
10-24 |
|
25-49 |
|
|
|
|
|
|
|
|
|
| JPC2460BK |
|
1 3/4"(W)x60"(H) (post), 24"x16 1/2" (base) |
|
$717.00 |
|
$681.15 |
|
$645.30 |
|
|
|
|
|
|
|
|
|
| JPC2472BK |
|
1 3/4"(W)x72"(H) (post), 24"x16 1/2" (base) |
|
$747.00 |
|
$709.65 |
|
$672.30 |
|
|
|
| |
|
| |
| |
| |
|
|
|
|
|
|
The Signicade A-Frame is a durable plastic sign stand that will not rust, splinter or ever need painting. You can display a sign on each side 24" x 36". Attach poster material, self-adhesive vinyl, or other sign material directly to the surface. Indented area helps protect the sign face. Up to 10 pounds of dry sand recommended for ballast. Molded handles for easy portability.
Production lead time for this product is 6 days.
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Prod # |
|
Description |
|
1-9 |
|
10-24 |
|
25-49 |
|
|
|
|
|
|
|
|
|
| JPC130-W-1PKF |
|
25" (W) x 45" (H) x 3" (D) |
|
$495.00 |
|
$470.25 |
|
$445.50 |
|
|
|
| |
|
| |
| |
| |
|
|
|
|
|
|
Rock-It Base holds a square post with reinforcing crossbars for 15% greater wind resistance and strength than round posts, with no sign twisting or rotating in the base. The base will not crack, chip, or crumble and has a fill hole to add dry sand for ballast so it won't tip in the wind, and durable plastic wheels. The post is pre-drilled for multiple sign sizes. Plastic is lightweight and will never rust or splinter.
Production lead time for this product is 6 days.
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Prod # |
|
Description |
|
1-9 |
|
10-24 |
|
25-49 |
|
|
|
|
|
|
|
|
|
| JPCRB2460W |
|
24" (W) x 25 1/5" (L) x 60"(H) |
|
$747.00 |
|
$709.65 |
|
$672.30 |
|
|
|
|
|
|
|
|
|
| JPCRB2472W |
|
24" (W) x 25.5" (L) x 72"(H) |
|
$747.00 |
|
$709.65 |
|
$672.30 |
|
|
|
| |
|
| |
| |
Go to Page: [Prev] [1] [2] [3] [4] [Next]
|
| |
| |
|
|
|
| |
Stay
Connected: |
|
|
| |
|
|
|
|
